The price per square meter of a prefabricated building is determined by building type, load-bearing system, insulation, and fittings. Price items and choices that reduce cost.
The price per square meter of a prefabricated building cannot be expressed with a single fixed figure. Multiple factors that vary by project directly affect the price. The quote given per square meter is shaped by parameters such as the building's intended use (residential, site office, personnel building, warehouse, etc.), load-bearing system type, insulation thickness, exterior cladding, interior fittings (kitchen, bathroom, electrical installation), and total production quantity.
Two buildings with the same square meterage can be priced differently due to different material and equipment choices. Therefore, rather than relying on a general cost range, determining the price through a project-specific technical specification is a more accurate approach. For a detailed breakdown of the cost items, the article on prefabricated house cost can be consulted.
When comparing price per square meter, attention must also be paid to what the quote covers. Foundation, transportation, assembly, and interior installation may be included in one quote and excluded in another; in this case, a seemingly low price per square meter may turn out to be more expensive overall.
The main factors affecting the price per square meter in prefabricated structures can be listed as follows:
Since the weight of these factors varies from project to project, the prices per square meter seen online can only give a rough idea; the concrete figure is calculated with project information.
To obtain a realistic price quote, it is useful to clarify the following information in advance:
When this information is missing, the figure given remains an estimate and may change as the project progresses. Information about Aşıcı Grup's background can be found on the about us page.
For projects that want to optimize the price per square meter, some practical approaches help keep costs under control:
Aiming for the lowest price per square meter does not always result in the lowest total cost; insufficient insulation increases heating expenses, while a weak roof detail increases maintenance expenses. The company's environmental approach is covered on the sustainability page, and its goals are covered on the mission and vision page.
The price varies depending on factors such as building type, load-bearing system, insulation thickness, facade cladding, interior fittings, and production quantity, which is why a project-specific quote needs to be prepared.
Buildings with standard dimensions, modular design, and produced in bulk are generally more cost-effective on a unit square meter basis, but the exact figure is determined according to project details.
Information such as square meterage, number of buildings, intended use, land location, and desired level of fittings speeds up the quote process.
Yes, the unit price per square meter is generally lower in bulk production orders compared to standard orders.
With dimensions and equipment tailored to your project, we will get back to you within 48 hours.

Sandwich panel container types, the difference between PUR and rock wool panels, technical specifications and usage…
22.11.2026 · 3 dk okuma →
The load-bearing system, facade, insulation, and installation determine 100 square meter steel house prices. Cost…
22.11.2026 · 3 dk okuma →
Garden house prices are determined by square meters, insulation, installation and assembly conditions. Cost items and…
22.11.2026 · 3 dk okuma →
The items that determine 100 square meter prefabricated house prices, plan differences, and choices that reduce cost.…
22.11.2026 · 3 dk okuma →
Single-story prefabricated house plans, square meter options, technical specifications, and usage areas. Get…
20.11.2026 · 3 dk okuma →
Types, technical specifications and usage areas of turnkey prefabricated buildings. A single-source solution from…
20.11.2026 · 3 dk okuma →
What do container companies do, how are they selected? Container types, points to check in the technical…
20.11.2026 · 3 dk okuma →
Container prices are determined by intended use, panel and insulation, interior equipment, quantity, and shipping.…
20.11.2026 · 3 dk okuma →
Do prefabricated and light steel buildings need a permit? Zoning status, architectural and structural design, building
22.09.2026 · 7 dk okuma →
The items that make up the budget of a prefabricated or container building: structural system, panels and insulation,
22.09.2026 · 8 dk okuma →
The steps after ordering a prefabricated, container or light steel building: survey, design, production, quality
22.09.2026 · 6 dk okuma →
The factors that determine the service life of prefabricated, container and light steel buildings; an annual
22.09.2026 · 6 dk okuma →
What makes prefabricated house prices vary? We explain the seven main cost drivers — floor area, insulation, number of…
01.08.2026 · 6 min read →
What are the differences between a container and a prefabricated building? We compare the two on portability, cost…
20.07.2026 · 5 min read →
Why are light steel buildings considered earthquake-safe? We explain their seismic performance in terms of low weight…
05.07.2026 · 7 min read →
Why is steel the key to sustainable building? We look at steel construction through recycling, low waste, energy…
18.06.2026 · 5 min read →