Steel Profiles

U Profiles

Galvanized U profiles, manufactured on precision CNC roll-forming lines with the quality of Aşıcı Grup Prefabrik, function as primary load-bearers in the base, ceiling, and connection axes of light gauge steel constructions with their corrosion-resistant structure and high load- bearing capacity. Their form geometry, fully compatible with weldless bolted connection architecture, offers millimetric and error-free installation ease on-site; by securely binding cassette systems, they provide seismic resistance to the structure and ensure long-lasting, safe solutions without causing any space loss in the interior.

Gallery

Product images

Technical Table

U Profile Section Properties

H63–300 mm

B41–75 mm

L10–20 mm

t0,75–2,50 mm

R2,50 mm

Code	H (mm)	B (mm)	t (mm)	L1 (mm)	R (mm)	Development (mm)	Weight (kg/m)	Area (cm²)	Iₓ (cm⁴)	Wₓ (cm³)	rₓ (cm)	Iᵧ (cm⁴)	Wᵧ (cm³)	rᵧ (cm)
U63x49x1,5	63	49	1.5	-	2.5	155	1.86	2.33	15.81	5.1	2.6	5.81	1.76	1.57
U63x50x2	63	50	2	-	2.5	155	2.48	3.1	20.14	6.6	2.54	7.9	2.38	1.59
U63x51x2,5	63	51	2.5	-	2.5	155	3.1	3.88	24.53	8.11	2.51	10.16	3.04	1.61
U75x58x1	75	58	1	-	2.5	187	1.5	1.87	18.43	4.98	3.13	6.7	1.69	1.89
U75x59x1,5	75	59	1.5	-	2.5	187	2.24	2.81	27.1	7.37	3.1	10.34	2.58	1.91
U75x60x2	75	60	2	-	2.5	187	2.99	3.74	35.22	9.65	3.06	13.92	3.47	1.92
U75x61x2,5	75	61	2.5	-	2.5	187	3.74	4.67	43.08	11.88	3.03	17.81	4.42	1.95
U90x51x1	90	51	1	-	2.5	188	1.5	1.88	25.04	5.62	3.64	5.01	1.36	1.63
U90x52x1,5	90	52	1.5	-	2.5	188	2.26	2.82	36.9	8.34	3.61	7.69	2.08	1.65
U90x53x2	90	53	2	-	2.5	188	3.01	3.76	48.34	10.98	3.58	10.5	2.82	1.67
U90x54x2,5	90	54	2.5	-	2.5	188	3.76	4.7	59.35	13.56	3.55	13.43	3.59	1.69
U100x52x1	100	52	1	-	2.5	200	1.6	2	32.33	6.53	4.02	5.46	1.43	1.65
U100x53x1,5	100	53	1.5	-	2.5	200	2.4	3	47.93	9.73	3.99	8.49	2.21	1.68
U100x54x2	100	54	2	-	2.5	200	3.2	4	62.69	12.79	3.95	11.44	2.97	1.69
U100x55x2,5	100	55	2.5	-	2.5	200	4	5	77.13	15.82	3.92	14.64	3.78	1.71
U140x52x1	140	52	1	-	2.5	240	1.92	2.4	70.46	10.13	5.41	6.02	1.5	1.58
U140x53x1,5	140	53	1.5	-	2.5	240	2.88	3.6	104.65	15.11	5.39	9.26	2.29	1.6
U140x54x2	140	54	2	-	2.5	240	3.84	4.8	138.13	20.01	5.36	12.66	3.1	1.62
U140x55x2,5	140	55	2.5	-	2.5	240	4.8	6	170.92	24.86	5.33	16.23	3.95	1.64
U150x53x1,5	150	53	1.5	-	2.5	250	3	3.75	123.18	16.59	5.73	9.44	2.3	1.58
U150x54x2	150	54	2	-	2.5	250	4	5	162.74	21.99	5.7	12.91	3.13	1.6
U150x55x2,5	150	55	2.5	-	2.5	250	5	6.25	201.55	27.33	5.67	16.54	3.98	1.62
U200x53x1,5	200	53	1.5	-	2.5	300	3.6	4.5	245.48	24.73	7.38	10.14	2.37	1.5
U200x54x2,5	200	54	2	-	2.5	300	4.8	6	325.3	32.85	7.36	13.88	3.23	1.52
U200x55x2,5	200	55	2.5	-	2.5	300	6	7.5	404.1	40.92	7.34	17.81	4.11	1.54
U250x75x1,5	250	75	1.5	-	2.5	394	4.73	5.91	524.7	42.22	9.42	28.6	4.78	2.2
U250x75x2	250	75	2	-	2.5	392	6.27	7.84	689.94	55.64	9.38	37.4	6.29	2.18
U250x75x2,5	250	75	2.5	-	2.5	390	7.8	9.75	850.46	68.72	9.33	45.84	7.76	2.16
U300x75x2	300	75	2	-	2.5	442	7.07	8.84	1071.9	71.93	11.01	39.04	6.4	2.1
U300x75x2,5	300	75	2.5	-	2.5	440	8.8	11	1323.63	88.98	10.96	47.86	7.9	2.08

The characteristic yield strength of the material used in the calculations is 235 N/mm². For other steel grades please contact our Technical Office.
Effective section calculations have been made in accordance with TS EN 1993-1-3, Eurocode 3 and AISI S100-2007.
The dimensions in the table cover the most commonly used profiles; for other sizes please contact the relevant department.

Why Asici Group?

Profile manufacturing to standards

S350GD+Z275 and equivalent galvanized sheet is used in U Profiles manufacturing; section dimensions and hole layout are produced to the project. Surface protection ensures long life in open areas.

Frequently Asked Questions

About U Profiles

To which standards is U Profiles produced?

Profiles are cold-formed on CNC roll-forming lines from high-strength galvanized steel; corrosion resistance falls under BS EN 10346. Effective section calculations are made to TS EN 1993-1-3, Eurocode 3 and AISI S100-2007.

Why is weld-free connection preferred?

Welding alters the material properties in the heat-affected zone and damages the galvanized coating. Bolted and riveted connections avoid this; they also speed up site assembly and keep the option of dismantling and rebuilding.

Can dimensions and thickness be changed?

Catalogue dimensions are prepared for the most common uses. Different sections and wall thicknesses can be produced according to the project's structural design; contact the technical office for the size you need.

How long does it resist corrosion?

Resistance depends on the galvanized coating class and the operating environment. Service life is long in enclosed, dry conditions; a higher coating class should be selected for coastal, chemical-plant and permanently damp environments.

Would you like more information?

Share your details and our team will get back to you within 48 hours.